Kunz Engineering AcrEase 40" 10.5HP Finish Cut Pull-Behind Mower H40B
Finish Cut Mower AcrEase Model H40B Mower Overview
The Kunz Engineering AcrEase H40B is a 40" class homeowner grade pull-behind mower. With its single cylinder manual start engine and manual blade engagement, it is the perfect addition to your riding mower or zero turn mower for larger yards.
It can also be easily pulled with an ATV. This mower provides an excellent manicured lawn at high mowing speeds, with a recommended mowing speed of 6 to 8 mph.
Its low profile design allows for easy mowing under low branch trees.
-
Make Short Work Of Large Parcels Of Property - Provides an excellent manicured lawn at high mowing speeds
-
10.5 HP Briggs And Stratton Powerbuilt 4-Cycle OHV Engine - Reliable and powerful engine with splash style lubrication system and recoil start
-
40" Side Discharge Cutting Deck - Deep deck design and two 20-inch blades for efficient cutting
-
Low Profile Design - Allows for easy mowing under low branch trees
Accessories
Floatation Kit
An extra front and back tire can be bolted in the center section of the mower deck. This is handy in the following applications:
- Great anti-scalp feature that helps to carry the center section of the mower deck over crowned or peaked areas.
- Works well on rough uneven ground where added floatation is needed.
- Allows the mower to mow right up to the waters edge around ponds.
- Works on all existing and new finish cut mowers.
- Allows the outside set of tires to extend over curbs or drop-offs.
- Provides added traction on steep hill sides.
Lawn & Garden Hitching
Use on riding mowers and zero turn radius mowers.
- The Lawn and Garden Hitching bolts directly to the existing hitch on any riding lawn mower or zero turning radius mower.
- Allows for close hitching of the AcrEase and telescopes in or out to adjust for the tow vehicles deck width
- When pulling multiple wing mowers it is necessary to purchase additional hitching.
- The long tongue extension is used when two AcrEase are pulled.
ATV Tongue
Use on ATVs, utility vehicles, and all other tow vehicles without mowing decks.
- The ATV tongue hitches directly to the tow vehicles’ existing hitch with a provided clevis pin.
- The ATV tongue can be quickly interchanged from the offset position to direct behind towing.
- Multiple mowers can be pulled with an ATV or UTV by using a combination of Lawn & Garden and ATV Tongue hitching.
Kunz Engineering AcrEase H40B Mower Specs
Manufacturer |
Kunz Engineering |
Model |
H40B |
Class |
Homeowner |
Engine Make |
OHV Briggs & Stratton |
Engine Model |
Power Built |
Engine HP |
10.5 |
Lubrication Method |
Splash |
Air Filter Type |
Std. Air Filter with Pre-Cleaner |
Electric Start (Battery not included) |
No |
Number of Mower Blades |
2-20" |
Blade Tip Speed (ft/min) |
17,500 |
Cutting Width |
38" |
Cutting Height (infinite adjust each wheel) |
1.0 - 4.0" |
Blade Engagement Clutch |
Manual |
Clutch Engagement Speed |
Manual |
Deck Metal Thickness |
11 GA |
Deck Top Plate Thickness (Additional Layer) |
11 GA |
Weight |
235 lbs |
Pneumatic Fixed Rear Tires |
13/500x6, 2 Ply Turf |
Front Tires on Casters |
9/350x4, Slick (Flat Proof Urethane) |
# Anti-Scalp Wheels Under Deck |
3 (2 Front, 1 Rear) |
Hour Meter / Tachometer |
No |
Oil Pressure Shut Off |
No |
Fuel Tank Size |
2.8 Qt. |
Blade Spindles |
25mm Shaft (.984") |
Bearing # |
6205-2 RST |
Drive Method |
1 B Section "V" Belt |
Warranty |
1 Year Residential |
Warranty - Engine |
2 Year Residential |
Kunz Engineering AcrEase H40B Finish Cut Mower Owner's Manual
Kunz Engineering Finish Cut Mower AcrEase Model H40B
Reviews